Forster
Forster Case Neck Graphiter
Forster Case Neck Graphiter
SKU:011341
Couldn't load pickup availability
When sizing a fired case, pulling the expander button through the case can present a problem because residual deposits left from firing can create friction when the expander is withdrawn. In a worst case scenario, that friction can cause distortion or stretching of the case neck. Properly lubricating the inside diameter of your case necks is the answer, but oils are not recommended because of the possibility of gunpowder contamination.
By moving the case neck up and down on the correct graphite-covered brush, the inner diameter (ID) of the neck can be cleaned and lubricated at the same time.
The Forster Case Graphiter is constructed of tough, impact-resistant plastic, and the base is drilled to permit permanent mounting to a loading bench. Three brushes are mounted in the base. They accommodate all calibers from .22 to .35. The Case Graphiter is supplied with adequate white “motor mica” to process 2,000 to 3,000 cases. A cover is included to prevent dust and grit from contaminating the graphite (motor mica).
Shipping & Returns
Shipping & Returns
Shipping Costs are calculated at the checkout, based on your postcode and the weight of all combined items.
Due to Australia Post limitations, the maximum weight for each order is 20kg. Orders over this weight limit will have to be placed in two separate orders. For heavy items please contact us directly to discuss shipping.
Expensive and/or fragile items will only be shipped via registered post with adequate insurance.
Due to Australian regulations we are restricted to shipping all projectiles to customers located in Australia only.
Dangerous goods including powders, solvents and primers cannot be shipped and MUST be collected from the QStore.
Share

Other Products
-
Accessories & Parts
Accessories & Parts
-
Ammunition
Including brass, loaded ammunition, powder and projectiles.