K&M
K&M - Controlled Depth Reamer
K&M - Controlled Depth Reamer
SKU:CDTR176
Couldn't load pickup availability
The K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even cut.
Shipping & Returns
Shipping & Returns
Shipping Costs are calculated at the checkout, based on your postcode and the weight of all combined items.
Due to Australia Post limitations, the maximum weight for each order is 20kg. Orders over this weight limit will have to be placed in two separate orders. For heavy items please contact us directly to discuss shipping.
Expensive and/or fragile items will only be shipped via registered post with adequate insurance.
Due to Australian regulations we are restricted to shipping all projectiles to customers located in Australia only.
Dangerous goods including powders, solvents and primers cannot be shipped and MUST be collected from the QStore.
Share

Other Products
-
Accessories & Parts
Accessories & Parts
-
Ammunition
Including brass, loaded ammunition, powder and projectiles.