Quick Change Ultramount Top Plate InLine Fabrication

Quick Change Ultramount Top Plates

These are the PRESS plates required for the InLine Fabrication Quick Change system. Refer to the list of part numbers at the bottom, below the video, then Select the ones you would like from the drop down menu above.
Please note: The other type of Inline Fab system Top plates for presses is called the Dedicated Top plates (separate product)

If you have limited or multi use bench space like most of us, the quick change system is what you need . To swap out or change over, remove 2 thumbnuts and swap presses in 30 seconds.
These plates here on this page secure to your reloading press, then fit into the InLine Fab quick change base plate for quick swapping of your reloading presses and the like. It is important to know that for this system to work you will also need one QC Base Plate which bolts on top of either leg system (3 leg heights available). Or for the flush bench mounting situation a slightly different base plate which is called QC Flush Mount Base Plate.
So the summary is this: The Base Plate remains fixed to the unit (the legs) and the Quick Change Plate remains secured to your Reloading presses or other accessories.
Quick change plates have a tongue shaped part to slip into the Base Plates and then 2 thumb screws at the front secure its position and lock it all together.
QC Plates (on this page) are drilled for different reloading presses and/or other items like Case Trimmers etc. Also available is a blank plate ( #45) so you can make your own connections.
We have plates for all mainstream units, including Hornady, RCBS, Dillon, Redding, Lyman & LEE. We also have plates for vises, trimmers, lubesizers, etc. Have a look at the list at the bottom of this page to see all the possibilities and then select or choose from the dropdown bar and add to cart.
These top plates come with the appropriate holes and hardware (Bolts, washers and nuts) to attach the your press to the plate.

By the way, the link for the QC Base Plate which is needed for either of 3 leg sets chosen is here  Quick change system base plate
The link for the special QC base plate for bench flush mounting is here Quick Change Flush Mount Base Plate

Video demonstrating how the quick change system works is here:

https://youtu.be/z4F93tWTC7Q

The part number list as per the dropdown menu above>

UTP1-1   Lyman T Mag II and Crusher II
UTP2-1   Redding Ultra Mag
UTP3-1   Redding T-7
UTP6-1   LEE Classic Turret Press (NOT "Value" Turret model)
UTP7-1   Dillon Square Deal
UTP8-1   Forster Co Ax press
UTP9-1   Redding Big Boss
UTP10-1 LEE Breech Lock Challenger (current production only)
UTP11-1  RCBS Rockchucker RC-1, RC-2, IV and Supreme IV, Turret and PRO 2000
UTP12-1  DILLON XL 650 / 750 /SL 900 SHOTSHELL
UTP14-1  Dillon RL 450 / 550B and 550C
UTP15-1  Hornady LNL Single Stage Classic and PACIFIC Single Stage
UTP24-1  Hornady  LNL  AP, Hornady Pro 7, Pro Jector
UTP26-1  RCBS Summit, New RCBS Rebel, RCBS Mini Grand Shotshell
UTP28-1  Redding Boss
UTP32-1  MEC 600, 600JR, 650 Super, Versa MEC (Please Note: Not for 600JR Mark 5)
UTP45-1  BLANK PLATE - 6" Deep x 8" Wide (Drill to suit what you need. Bolts not supplied)
UTP59-1  Forster Original Case Trimmer (5.5" Base)
UTP64-1  Lyman Universal Case Trimmer ( P/N #7862008 and #7862000)
UTP66-1  Dillon Super Swage 600 Front to Back
UTP68-1  Hornady LockNLoad Iron Single Stage
UTP71 -1 Lee Auto Bench Prime System
UTP72-1  MEC Marksman Single Stage (Press only, not the MEC stand)
UTP74-1  Square BLANK Top Plate 8"x 8" (for vices, grinders, buffers etc)
UTP89-1 Area 419 Zero Press
UTP91-1  Henderson Precision Case Trimmer
UTP92-1  Real Avis Master Gun Vice
UTP95-1  LEE Six Pack Pro (PRO 6000)