Redding - 223 Rem Dies

Body Dies are designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. They are made without internal parts and intended for use only to resize cases which have become increasingly difficult to chamber after repeated firing and neck sizing.

Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001" increments for precise seating depth and is infinitely adjustable (without clicks). Also has a "zero set" feature that allows you to zero the micrometer to your rifle or favorite seating depth. Shellholder sold separately.  Notes: THIS DIE DOES NOT CRIMP THE BULLET. A CRIMP DIE MUST BE PURCHASED SEPARATELY.

Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of our full length die sets (described below) with the addition of a neck (NK) sizing die.

Full length resizing while maintaining exact control of the case neck is often desirable in one operation. The Type S - Resizing/Bushing Die accomplishes this task with the precision you would expect from Redding. * Uses the same interchangeable bushings (.001" increments) as those used in our bushing style neck style neck sizing dies. * The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired. * Concentricity is enhanced by the ability of the bushing to self-centre on the neck of the cartridge case.